LED headlights/ additional lights

Pair of 2-function LED lights (Road / Long range)

Wide and powerful lighting

Each light has the Crossing function (25w), and long range (25w)

Light intensity: 6000 lumens / pair

Construction: aluminum case, 100% waterproof.

V1:

2 LED lights

V2:

V1 + Fixing flange for 25mm tube (Other diameters on request)

V3:

V1 + V2 + Electrical harness with 2 relays ready to connect. 4 cables to be connected: + and – on the battery, 1 cable to be plugged into the dipped beam, and 1 onto the main beam. The lighting will therefore be synchronized with the original lights of the motorcycle. This is possible on all motorcycles with a non-multiplexed harness.

V4:

V1 + V2 + Electrical harness with 1 relay and 1 switch ready to connect. 3 cables to connect: + and – on the battery, and 1 cable on a + after ignition. The lighting will therefore come on with the contact of the motorcycle, and the crossing / road passage is done via a switch. This assembly is possible for motorcycles multiplexed or not.

=> Tell me the desired cable lengths.

=> You need a location of about 6cm in diameter, 8cm high to place the relay and wiring